13.400.0104: AAC Exterior Wall Types
13.400.0104: AAC Exterior Wall Types
13.400.0104: AAC Exterior Wall Types
13.400.0104: AAC Exterior Wall Types
13.400.0102: AAC Exterior Wall Types
11.030.0212: Terra cotta rainscreen – Plan detail, CMU backup, insulation
11.030.0211: Terra cotta rainscreen – 3D view, CMU backup, insulation This detail shows a ventilated, open-joint rainscreen system made up of terra cotta cladding clipped to a proprietary aluminum track system. The aluminum struts are anchored to a concrete masonry backup with aluminum clip angles. The CMU has a continuous air barrier. Dynamic 3D Detail…
09.070.0101: Stucco Assembly – Direct Applied, Concrete Masonry This detail shows a three coat Portland cement stucco assembly direct-applied to a backup of concrete masonry with flush joints. A 1/4″ scratch coat and 1/2″ brown coat make up the base coat, with a finish coat on the surface. Dynamic 3D Detail Explore this detail and…
07.130.0101: Epoxy Terrazzo – Acceptable Concrete
06.070.0101: Wall Tile – One Coat Method, Wet Area This detail shows tile over concrete masonry (CMU) laid in the one-coat method in a wet area. There is a waterproof membrane over the CMU, metal lath embedded in a bed of mortar, with the tile adhered to a dry-set or latex-modified portland cement mortar bond…
04.030.0201: Exterior Stone Attachment Relief Angle & Bent Plate
02.020.0201: Vertical Cantilever Wall This partition detail shows a vertical cantilever condition. The wall is anchored at the base with a vertical dowel into the slab. There is a gap at the top of the wall to allow for deflection of the structure above. Horizontal joint reinforcement and vertical reinforcement are shown. Top and bottom…