10.030.0732: Pressed Terra Cotta Cornice and Parapet Rebuild

10.030.0732: Pressed Terra Cotta Cornice and Parapet Rebuild This detail illustrates a rebuild strategy for replacing existing architectural terra cotta cornice, balustrade parapet, and accessory units. The existing terra cotta is replaced with new hand-pressed terra cotta units. It is installed, not filled, with weep holes at the underside of each overhanging unit, which are…

10.030.0733: Extruded Terra Cotta Cornice and Parapet Rebuild

10.030.0733: Extruded Terra Cotta Cornice and Parapet Rebuild This detail illustrates a rebuild strategy for replacing existing architectural terra cotta cornice, balustrade parapet, and accessory units. The existing terra cotta is replaced with new extruded terra cotta units. It is installed, not filled, with weep holes at the underside of each overhanging unit, which are…

Extruded terra cotta sill and mullion rebuild

10.030.0433: Extruded Terra Cotta Sill and Mullion Rebuild

10.030.0433: Extruded Terra Cotta Sill and Mullion Rebuild This detail illustrates a modern rebuild strategy for replacing existing architectural terra cotta (TC) sill, mullion, and accessory units around window openings. The existing terra cotta is replaced with new extruded terra cotta units, installed not filled, with weep holes at the underside of each overhanging unit;…

Close-up of pressed terra cotta sill and mullion rebuild

10.030.0432: Pressed Terra Cotta Sill and Mullion Rebuild

10.030.0432: Pressed Terra Cotta Sill and Mullion Rebuild This detail illustrates a modern rebuild strategy for replacing existing architectural terra cotta sill, mullion, and accessory units around window openings. The existing terra cotta is replaced with new hand-pressed terra cotta units. It is installed, not filled, with weep holes at the underside of each overhanging…

06.080.0243R: Interior Wall Retrofit | Tile over Existing Gypsum Board on Wood or Steel Studs, Cementitious Bond Coat

06.080.0243: Interior wall Retrofit | Tile over Existing Gypsum Board on Wood or Steel Studs, Cementitious Bond Coat This detail illustrates newly installed ceramic, gauged porcelain, stone, or glass tile on exsiting gypsum board backing on existing gypsum board backing on existing steel or wood studs. This is a retrofit application for use on interior…

10.410.0503: Composite Mortar Repair, Large Area (>2 s.f. ±)

10.410.0503: Composite Mortar Repair, Large Area (>2 s.f. ±) This detail illustrates a composite mortar repair installed in an existing masonry unit (e.g. stone, terra cotta, cast stone, etc.) where a previous spall, multiple-cracks, or delamination existed. Composite mortar repairs are cementitious materials and fine aggregates (e.g. sand) blended with water. For composite mortar repairs…

10.410.0502: Composite Mortar Repair, Small Area (1 s.f. ±)

10.410.0502: Composite Mortar Repair, Small Area (1 s.f. ±) This detail illustrates a composite mortar repair installed in an existing masonry unit (e.g. stone, terra cotta, cast stone, etc.) where a previous spall, multiple-cracks, or delamination existed. Composite mortar repairs are cementitious materials and fine aggregates (e.g. sand) blended with water. For composite mortar repairs…