02.120.1101: Column Connection Details – Option 1 This detail shows a the connection of a loadbearing CMU wall to a steel column as part of a hybrid masonry and steel structural system. The CMU is anchored to the column with a 16 ga. x 1 1/2″ wide strap anchor. Fireproofing on the steel is not…
02.020.0203: Horizontal Span – CMU Partition Dynamic 3D Detail Explore the detail and download the Sketchup Model in the 3D Warehouse.
02.010.1311: Control Joint This detail shows a vertical control joint at intersecting CMU walls. The debonded shear anchor ties the walls together, but also allows the intersecting wall to shrink back from the continuous wall, as the anchor moves along its track. There is horizontal joint reinforcement at 16″ o.c. vertically in the wall (not…
02.010.0312: Base of Wall – Single Wythe Block, Flashing at Inside Face This detail shows an 8” (nominal) split face concrete masonry (CMU) wall, base of wall condition. There is an interior finish of steel studs and gypsum board, allowing the flashing to return at leaset 8″ vertically and then be anchored to the interior…
02.010.0311: Base of Wall Detail – Single Wythe Block, Split Base Course Dynamic 3D Detail Explore the detail and download the Sketchup Model in the 3D Warehouse.
01.030.0751: Roof Detail – High Wall – Low Roof Dynamic 3D Detail
01.030.0703: Shelf Angle Detail – Typ. Face Brick, Term Bar This shelf angle detail uses a typical brick course below the shelf angle. This may result in a wider horizontal expansion joint below the angle, but is more economical than using a lipped (notched) brick. The shelf angle is flashed with flexible thru-wall flashing, transitioning…
01.030.0702: Shelf Angle Detail – Lipped Brick This shelf angle detail uses a lipped (notched) brick below the shelf angle to avoid creating a horizontal expansion joint below the angle that is excessively wide. The shelf angle is flashed with flexible thru-wall flashing, transitioning to more durable sheet metal flashing drip edge at the exposed…
01.030.0303: Base of Wall Detail – Flex. Flashing No Drip; Term Bar, MDCD This masonry base of wall detail shows a flexible thru-wall flashing mechanically fastened to the CMU backup through a termination bar, with a continuous bead of sealant along the top of the term. bar. Permissible by code but not consistent with best…
09.070.0103: Stucco Assembly – Stucco Over CMU with Insulation This detail shows a three coat Portland cement stucco assembly applied over self-furring lath with two layers of weather resistive barrier (WRB) behind the lath. The structural backup is concrete masonry, with rigid insulation between Z-channel furring. A 1/4″ scratch coat and 1/2″ brown coat make…